Ondulé Screen by Anton Björsing for Karl Andersson & Söner

Ondule Screen Anton Bjorsing KA

Ondulé Screen – Flexible and modular room divider that breathes wood

It is enveloping with its softly wavy and covered facade and is at the same time airy and cozy.

Each module can stand alone or a lot can be connected to create a room within a room.

Ondulé Screen is derived from the Ondulé and Ondulé Club seating furniture. The frame, the rods and the foot with felt are made of solid oak, ash, standard stains, white pigmented oak or ash.

 

Ondule Screen Anton Bjorsing KA 2

 

The surface finish is clear lacquer. The wavy filling between the rods is molded felt in the colors anthracite, light gray and beige.

Ondulé Screen is available in two heights 1040, 1700 mm and two widths 915, 1245 mm. The low model is available in two versions; transparent without felt or filled with felt. The higher model is available in three versions; fully filled with felt, filled at the bottom and transparent at the top or completely transparent with only the round rods as a screen. The connection fitting is screwed to the bottom of the outer post on a predetermined side in pre-drilled holes with which you easily connect the modules without the need for any tools.

 

Ondule Screen Anton Bjorsing KA 1

 

As accessories, there are two sizes wooden box with dovetail joints, for plants, bottles, pens or whatever you need to store. The boxes are hung on the modules using black metal brackets in two different lengths. There is also a hanging hook for clothes or bags.

The different modules come assembled and are easy to disassemble when it’s time to freshen them up.

Ondulé Screen is useful in environments that you want to completely screen off, create a room within a room or want to screen off at the bottom but still have contact with people behind the room divider.

 

Ondule Screen Anton Bjorsing KA 3

 

 

All new Products from Karl Andersson & Söner 2016

 

karlandersson

More design from Karl Andersson & Söner:

Soigne anton bjorsing KA

Soigné Seating Series by Anton Björsing for Karl Andersson & Söner

Soigné is a well-tailored and airy seating furniture series that is a nod to the …

Opera studio stockholm KA

Opera Pulpet by Studio Stockholm for Karl Andersson & Söner

Opera Pulpet is a lectern that is a further development of the Opera table series …

Ondule Screen Anton Bjorsing KA

Ondulé Screen by Anton Björsing for Karl Andersson & Söner

Ondulé Screen – Flexible and modular room divider that breathes wood It is enveloping with …

TIP simon bagstam KA 1

T.I.P. Stool by Simon Bågstam for Karl Andersson & Söner

T.I.P. is a practical small stool or table with a few components that can be …

Mandala anki gneib mia cullin 2026

Mandala design by Anki Gneib & Mia Cullin for Karl Andersson & Söner

Mandala is a table designed based on experiments with sheets of paper The tables are …

SANDER Café chairs by Roger Persson for Karl Andersson & Söner developing the armchair concept for café environments

Sander Café is a development of the Sander armchairs by Roger Persson – Karl Andersson & Söner

Sander Café is a development of the Sander armchairs Sander brings to mind the history …

All design & news from Karl Andersson & Söner: Swedish Furniture from Huskvarna →